6.2 USB Interface Test
The iPan USB Interface Test checks the connection between the iPan USB Interface and
the host computer. During this check, a gray test pattern is displayed, which should be
reviewed for clarity and contrast.
A good test pattern will have distinct shades of gray that are easy to distinguish. A poor
test pattern will have random and unrelated lines or other image artifacts. A poor test
pattern suggests a problem with the USB cable, USB port, or possibly the iPan USB
Interface itself.
USB Interface
Diagnostic Test
Perform the following steps to start the USB Interface diagnostic test
procedure.
Step Action
1
Close the CDR DICOM or EagleSoft program (if running)
2
Verify that iPan USB Interface is connected to the host computer
3
Start the iPan Utility.
4
Click Tools > USB Interface Test.
Note: After a momentary pause, a test pattern is displayed. The orange LED
indicator on the iPan USB Interface blinks as the test patters scrolls.
iPan User Guide
B1051601 Rev. –
15