Scanivalve MPS4264, Hardware And Software Manual

Page: 51 / 99

45
MPS4264
Section 5: Software
PTP (Precision Time Protocol) Commands
Clear Accumulated PTP Statistical Data
DESCRIPTION Clears the accumulated data in the histogram buffers and restarts sampling.
SYNTAX PTPCLEAR
RETURNS A prompt when ready for the next command.
EXAMPLE
PTPCLEAR
PTP Histogram Cleared
>
Display PTP Statistics
DESCRIPTION Displays the accumulated data in histogram form.
SYNTAX PTPSTAT
RETURNS OFM, INTERVAL, <interval value>, <interval -6>, <interval -5>, <interval -4>, <interval -3>, <interval
-2>, <interval -1>, <interval 0>, <interval 1>, <interval 2>, <interval 3>, <interval 4>, <interval 5>,
<interval 6>
A prompt when ready for the next command.
EXAMPLE PTPSTAT
OFM, INTERVAL, 100000, 114, 13, 10, 23, 21, 15, 36, 6, 12, 9, 23, 10, 129
>
Get PTP Time
DESCRIPTION Gets the current PTP time as used by the MPS. Time is adjusted by UTCOFFSET.
SYNTAX GETTIME
RETURNS Current Time yyyy/mm/dd hh:mm:ss sec nnnn ns
EXAMPLE
GETTIME
Current Time 2014/2/6 0:23:52.0 sec 3335 ns 439809720
>
Get Scan Start Time
DESCRIPTION Gets the start time of the last scan. This command is valid in all modes. If no scan has been run
since power up the following time is returned:
2015/1/1 0:0:0.000000
SYNTAX SST
RETURNS yyyy/mm/dd hh:mm:ss.nnnnnn
EXAMPLE SST
2016/4/29 8:45:25.000000
>