Scanivalve MPS4264, Hardware And Software Manual

Page: 65 / 99

59
MPS4264
Section 5: Software
IP Variables
The IP settings control the IP address and associated network identification settings of the MPS4000. The IP configuration is
accessed by the command LIST IP.
List IP Settings (LIST IP)
DESCRIPTION Returns all of the IP settings
SYNTAX LIST IP
RETURNS All of the IP setting followed by the prompt.
EXAMPLE
LIST IP
SET IPADD 10.0.1.222
SET SUBNET 255.255.0.0
SET MAC 0.96.93.90.0.100
SET LOGIN Scanivalve
SET PASSWORD Scanner
SET LOGIN1 Scanivalve1
SET PASSWORD1 Scanner1
SET ALLOWANON 1
SET APP Mps4000.hex
SET GW 0.0.0.0
SET NAME MPS0000
>
Set IP Address of the MPS (IPADD)
DESCRIPTION Sets the IP address of the MPS4000
SYNTAX SET IP <ipadd>
Where <ipadd> is any valid IP address in the form nnn.nnn.nnn.nnn
When <ipadd> is set to 0.0.0.0 then DHCP is used. See the section on DHCP.
RETURNS Prompt when ready to accept a new command
EXAMPLE SET IPADD 10.0.1.222
>
DEFAULT 191.30.105.100
RANGE Any valid IP address
Set Subnet of the MPS (SUBNET)
DESCRIPTION Sets the subnet mask for the MPS4000
SYNTAX SET SUBNET <mask>
Where <mask> is in the form nnn.nnn.nnn.nnn
RETURNS Prompt when ready to accept a new command
EXAMPLE SET SUBNET 255.255.0.0
>
DEFAULT 255.255.255.0
RANGE Any valid subnet mask