Microtek ArtixScan DI 5230, Руководство для начинающих

Страница: 1 / 16

1
Install Software
Unpack your scanner package and check for
major components.
Copyright © 2013 Microtek International, Inc. http://www.microtek.com
I49-004886 B, September 2013
Start Here
I nstalling your Microtek ArtixScan DI 5230/5240/5250/5260 &
ArtixScan TS 540T
3
1. Scanner
2. Hi-Speed USB cable
3. Software CDs/DVDs
4. Document Feed Tray
5. Power adapter
6. Power cord
1
5
2
4
Important: You must install software before connecting
your scanner. Always close any open programs, and
turn off Anti-virus utilities before installing software.
PC:
A. Place the Microtek Software CD/DVD
into a drive, and follow the on-screen
instructions to install the scanner
driver and software.
B. Restart your computer at the end of all
software installation.
NOTE : If the Microtek Software Installer screen
does not come up automatically, double-click the
following in succession: “My Computer”; the CD-
ROM (or DVD-ROM) icon; then cdsetup.exe to
start the installer program.
MAC:
A. Place the Microtek Software CD/DVD
*
into
a drive, and double-click the ScanPotter
installer icon to install ScanPotter.
B. Install the remaining software components,
then restart your computer at the end of all
software installation.
NOTE : After rebooting your Macintosh, the Microtek
software will attempt to locate your scanner on the
system. Since this is your first install and you have not
yet connected the scanner, simply ignore the message
that appears and proceed to the next step.
* Microtek software CD/DVD (ScanPotter) for the scanner is under
development; therefore, it may not come with your scanner package.
Microtek will provide it to you as soon as possible when it is ready.
Unpack Contents
6