![background image](http://html1.mh-extra.com/html/scaime/enod4-b/enod4-b_manual_1205995073.webp)
73
SCAIME Manual : NU-eNod4B-ETH-E-236708-D.docx
Page 1/4
Min permissible *
instant flow rate
0 – 6553.5
Minimum value for flow rate for alarm function.
Max permissible *
instant flow rate
0 – 6553.5
Maximum value for flow rate for alarm function.
Min permissible
flow*
rate control output
0 – 6553.5
Minimum value for control output for alarm function.
Max permissible
flow*
rate control output
0 – 6553.5
Maximum value for control output for alarm function.
Page 2/4
Min permissible *
conveyor speed
0 – 6553.5
Minimum value for belt speed for alarm function.
Max permissible *
conveyor speed
0 – 6553.5
Maximum value for belt speed for alarm function.
Min permissible *
conveyor load
0 – 6553.5
Minimum value for belt load for alarm function.
Max permissible *
conveyor load
0 – 6553.5
Maximum value for belt load for alarm function.
Page 3/4 et 4/4
Inhibit time flow
rates *
load alarms at start
0 – 65535 sec
Monitoring the flow rate or belt load is only activated after this delay time
when the belt is started. It is expressed in second.
Inhibit time flow
rates *
load alarms in service
0 – 65535 sec
When the flow rate or belt load is below/above the min / max value, the
alarm is activated after this delay elapsed. It is expressed in second.
Inhibit time speed *
alarm at start
0 – 65535 sec
Inhibition time at belt start of speed monitoring in second.
Inhibit time flow
rates *
load alarms in service
0 – 65535 sec
Inhibition time in service of speed monitoring in second.
Inhibit time belt fault
alarm at start
0 – 65535 sec
Inhibition time at belt start of belt fault monitoring in second.
Inhibit time belt fault
alarm in service
0 – 65535 sec
Inhibition time in service of belt fault monitoring in second.
Stop/Susp. dosing on
alarms default
Yes / No
Stop totalization function if alarm occurred