42
SCAIME Manual : NU-eNod4B-ETH-E-236708-D.docx
12
ENODTOUCH – HUMAN MACHINE INTERFACE (OPTION)
12.1
Online functioning
12.1.1
Startup screens
At first Power-On, eNodTouch is set to manage one eNod4 at the address 1, the connection screen is displayed while
eNodTouch try to communicate with connected eNod4 device.
Then a redirection screen appears during 3 seconds for a redirection to a main screen if the communication is
established between eNodTouch and eNod4 communication or an error screen if eNodTouch does not manage to
connect to the eNod.
If there is no eNod4 connected or if the display unit cannot communicate with eNod4 device, a communication error
screen appears. In this case, check the wiring between eNodTouch and eNod4 (§
Electrical Powering
) and check that
the communication parameters of eNodTouch and eNod4 are correct (§
Peripheral – Device PLC Settings
).
Redirection screen
Connection screen
Communication error screen
