SBG Navsight Apogee IMU Hardware Manual Download Page 4

Page: 4 / 74

Navsight Solution

– Hardware Manual

NAVSIGHTHM.1.3

4. IMU interface specification............................................................................................................................. 29

4.1. Surface IMU interfaces............................................................................................................................ 29
4.2. Subsea IMU interfaces............................................................................................................................ 29

5. Processing unit Interfaces specifications....................................................................................................... 30

5.1.  Rugged version Overview........................................................................................................................ 30
5.2.  Rack version Overview............................................................................................................................. 31
5.3.  Interfacing capabilities........................................................................................................................... 32

5.3.1. Supported protocols.............................................................................................................................................................. 32

5.4. Keyboard and LEDs indicators................................................................................................................ 33

5.4.1. LEDs status indicators........................................................................................................................................................... 33
5.4.2. Buttons actions.................................................................................................................................................................... 34

5.4.2.1. Basic actions................................................................................................................................................................. 34
5.4.2.2. Advanced actions........................................................................................................................................................ 34

5.5. IMU interface.......................................................................................................................................... 34
5.6. ETH interface.......................................................................................................................................... 35

5.7. CAN interface........................................................................................................................................... 36

5.8. Serial ports interfaces........................................................................................................................... 38

5.8.1. PORT A Interface................................................................................................................................................................... 38

5.8.2. PORT B and C interfaces...................................................................................................................................................... 40

5.8.3. PORT D interface.................................................................................................................................................................. 42

5.8.4. PORT E interface.................................................................................................................................................................. 43

5.9. SYNC OUT B............................................................................................................................................ 45

5.9.1.1. Electrical specifications................................................................................................................................................ 45

5.10. SYNC In A, B, C, D and E........................................................................................................................ 45
5.11. GPS antenna connectors........................................................................................................................ 46

5.11.1. Electrical specifications........................................................................................................................................................ 46
5.11.2. GPS antenna advice.............................................................................................................................................................. 47

4/74

Summary of Contents for Navsight Apogee IMU











































































Search results

Summary of Contents for Navsight Apogee IMU

Reviews:

Related manuals for Navsight Apogee IMU

Brands by name

Popular brands

SBG Navsight Apogee IMU, Hardware Manual

Search results

Summary of Contents for Navsight Apogee IMU

Reviews:

Related manuals for Navsight Apogee IMU

Brands by name

Popular brands