SBG Navsight Apogee IMU Hardware Manual Download Page 33

Page: 33 / 74

Navsight Solution

– Hardware Manual

NAVSIGHTHM.1.3

5.4. Keyboard and LEDs indicators

5.4.1. LEDs status indicators

Following LEDs display various useful status information.

LED

Name

Color codes

Power status

OFF: No power supply available

RED

: Unit is Idle (not running but power is available).

BLINKING ORANGE

: No valid IMU data has been received

BLINKING GREEN

: Unit is starting up and is not yet ready

GREEN

: Unit is running correctly

Ethernet status

OFF: No network connected

RED

: The product wasn't able to get a valid auto ip (private) or static IP address

ORANGE

: The product has a valid auto ip (private) or static IP address

GREEN

: The product has successfully obtained a valid IP address from a DHCP server

GNSS status

OFF: No GNSS available

BLINKING RED:

Unknown positioning mode

RED

: Standalone mode

BLINKING ORANGE

: DGNSS with RTCM data older than 10 seconds

ORANGE

: Stable DGNSS mode with optimal RTCM age

BLINKING GREEN

: Float RTK or PPP solution

GREEN

: Fixed RTK or PPP solution (centimetric accuracy)

INS status

OFF: Kalman filter is not yet initialized

BLINKING

RED

: Vertical gyro / AHRS mode in alignment phase

RED

: Vertical gyro / AHRS in aligned mode

BLINKING ORANGE

: INS, in alignment phase. INS outputs are not all in "valid state"

ORANGE

: INS is aligned but Position/Velocity/Attitude/Heading are not all in "valid state"

BLINKING GREEN

: INS, in alignment mode. INS outputs are all in "valid state"

GREEN

: INS, is aligned and Position/Velocity/Attitude/Heading are all in "valid state"

Datalogger status OFF: Datalogger not running

RED

: Datalogger error or full

BLINKING RED

: Data logger disk is being formatted

BLINKING ORANGE

: Data logger is waiting for data but disk is almost full > 80%

ORANGE

: Data logger is logging but almost full >80%

BLINKING GREEN

: Data logger is waiting for data

GREEN

: Data logger is running

33/74

Summary of Contents for Navsight Apogee IMU











































































Search results

Summary of Contents for Navsight Apogee IMU

Reviews:

Related manuals for Navsight Apogee IMU

Brands by name

Popular brands

SBG Navsight Apogee IMU, Hardware Manual

Search results

Summary of Contents for Navsight Apogee IMU

Reviews:

Related manuals for Navsight Apogee IMU

Brands by name

Popular brands