Navsight Solution
– Hardware Manual
NAVSIGHTHM.1.3
5.11.2. GPS antenna advice
Navsight S and T embed a high performance, triple frequency GNSS receiver.
For optimal performance, SBG Systems recommends the use of a geodetic multi-frequency, multi-
constellation GNSS antenna.
SBG Systems has selected some high quality GPS antennas for different applications. Please refer to the
section 7.8 GPS accessories to get more details on available antennas.
5.12. Internal Datalogger
Navsight includes an internal data-logger capable of storing all data at 200Hz for 48 hours. The internal
data-logger is composed of a high speed memory buffer and an 8 GB flash storage.
Access to the logged data is ensured by accessing the FTP server.
5.13. Power supply interface
The power supply uses a 2 ways male Push-pull ODU connector reference G81F1C-P02MPH00000. The
connector mates with the following plug reference: S31F1C-P02LPN0-350S. It is also compatible with other
manufacturers such as Fischer Core Series.
Both Rugged processing unit and rack processing unit use the same power connector.
Note: Power connector share the same specifications & pin-out as Ekinox, Apogee surface units, as
well as Splitbox units. However, previously provided power supplies may not provide sufficient
current outputs for Navsight operation.
5.13.1. Connector pin out
Pin #
Name
Description
SHIELD
SHIELD
Connected to mechanical ground
1
VIN+
Power supply input
2
VIN-
Power supply return
47/74
Figure 5.20: Power plug top view
Figure 5.19: Power receptacle front view
