SBG GeoStar 200, User Manual

Page: 53 / 70

Settings
Page 53/70 May 2015 I 2.0
5.4. SmartSwitch (Section Controller)
With the SMARTSWITCH -key (Figure 79) it is
possible, if present, to set the SmartSwitch section
control. Section control is used to automatically
switch sections, for example on sprayers, seeders,
spreaders and planters.
For a specific SmartSwitch user manual, see
http://www.sbg.nl/support/downloads-support/.
5.5. VRA (Variable Rate Application)
SBGuidance can be configured to simultaneously
control a maximum of 3 external location-
dependent devices. Tap on
VRA (Figure 80) to
open the application.
The parameters of each of the different devices
can be changed in the individual tabs (depending
on the number of devices connected). However, a
specific connection cable is required to do this.
For further details regarding the use of the VRA
application, please refer to the
SBGuidance VRA
quick start operating manual. This manual can be
found at http://www.sbg.nl/support/downloads-
support/.
Figure 79 Setup SmartSwitch
Figure 80 Setup VRA