Page 24/70
| May 2015 | 2.0
4.1.2.
A-B
field
In this type of field, a reference line is created
between two fixed points.
After tapping AB at the bottom of the screen, the
menu will display the option
Create field
:
A-B
Define point A by placing yourself in the position
where the reference line has to start, and then tap
on
A
. Now move to the end of the field and tap
B
.
SBGuidance will automatically draw a straight line
between these two points. The distance between
point A and B is displayed at the bottom of the
screen. This distance must be at least 20 metres.
As long as the field has not been saved, it is
always possible to define one of the two points
again. In order to ensure that the AB line runs
parallel to the edge of the field, it is important that
point A and point B have the same distance to the
edge of the field.
Tip!
When defining point A, the vehicle must be
stationary. This makes it easier to precisely
define where this point should be. The
corner point is the position of the GPS
antenna on the tractor.
[Optional step]
After points have been set, it is possible to add a
headland line using
Rotate AB line
Select the point from which the headland turn
should be made and then tap the icon with the
direction in which to turn. Then add the desired
angle for the headland turn.
It is always possible to return to the previous
menu using the blue arrow at the bottom right of
the screen.
Figure 23 Create field: A-B
Figure 24 Rotating the AB line
