Page 37/70
May 2015 I 2.0
Please note!
If the steering system alternates
continuously between two speed ranges,
the steering may not always indicate the
desired driving behaviour. Drive faster or
slower so that only one speed set remains
active or make sure that the gain values in
the two speed sets are equal.
With
Line acquisition
you can chose how quickly
the tractor steers towards the line. This is
particularly important when auto steer is activated
while driving far from the active track. Tap on the
indicator, to open the line acquisition
settings screen (Figure 45) and chose the desired
value.
Value 0: machine steers aggressive towards the
active track (for example: to steer quickly on the
line while leaving the headland).
Value 4: machine steers lazy towards the active
track (for example: while using a self-propelled
sprayer).
Controller
indicates the type of controller:
Advanced
(standard controller)
With
Calibration
several parameters of the
steering system can be changed, like wheel
sensor voltages, minimal steering voltages and
pressure sensor value.
Warning!:
The hydraulic, gain and line acquisition
parameters are already set by the dealer
during the installation and calibration of the
steering system. Changing these
parameters can cause poor performance of
the steering system. Therefore, please
contact your SBG dealer before changing
these parameters.
Figure 45 Line acquisition
