Page 35/70
May 2015 I 2.0
5. Settings
Figure 41 shows which functions are invoked after
selecting the
SETUP
key.
The main menu can be reached again by tapping
on
BACK
at the top left of the screen.
5.1. Vehicle settings
Press the
VEHICLE
key. The options
TUNING
and
OFFSETS
(top right) are used to change the
vehicle settings (Figure 42).
As a default, the
TUNING
window is displayed at
the bottom of the screen. This window can be
used to change the parameters for the steering
system of the tractor and/or implement. The
different steering systems will be discussed in the
following sections in more detail.
Tip!
The correct tuning parameters will depend
on the field conditions and the operation to
be performed.
Please note!
Changes made to the tuning of the machine
may result in incorrect steering of the
machine. Therefore, always write down the
initial value on paper, before making any
changes.
Changing the CAN
module settings.
Changing the
settings for
variable metering.
Changing the
display and
language.
Changing the GPS
and modem
settings.
Changing vehicle
settings like
machine offsets
and tuning.
Figure 41 Settings menu
Figure 42 Settings vehicle