SawStop TSA-FOT, Owner'S Manual

Page: 57 / 72

52
TSA-FOT OWNER’S MANUAL
20
Use a 5mm hex L-wrench to tighten the three M10 x 20 set screws to secure
the Folding Outfeed Table to the rear rail.
Use a straightedge to recheck that the tops of the table tubes are flush or
just beneath the top of the saw table and make any necessary adjustments.
WITHOUT WING
21
Press a tube end cap into the top of both support legs and into the outer
ends of the four table support tubes.
Fig. 55