5
Save Marine, une division de
Save innovations
3 rue des arts et métiers, 38000 Grenoble, France I +33 (0)4 58 00 34 66 I [email protected]
3
Conditions and limits of using
3.1
Transom robustness and flatness
Check the robustness of the transom. The transom must accept the forces generated by
the hydrogenerator. In case of doubt we strongly recommend to strengthen it. Seek the
advice of a marine professional.
The location on the transom for the home plate should be flat to avoid any torsion which
can cause a breakage of the home plate.
3.2
Batteries compatibility
The hydrogenerator is designed for recharging the service batteries of the sailboat. Do
not connect it to any other device.
The system is compatible with the vast majority of batteries.
3.3
Maximum speed allowed
The force exerted on the hydrogenerator when cruising increases as the square of the
boat speed. The hydrogenerator is designed for a speed range from 0 to 10 knots. A higher
speed even during a short period may cause permanent damages to the hydrogenator.
Do not use at a cruising speed exceeding 10 knots
The regulator continuously records the H240 data, including the speed
