6
Save Marine, a division of
Save innovations
3 rue des arts et métiers, 38000 Grenoble, France I +33 (0)4 58 00 34 66 I [email protected]
3.1
Select the location of the home plate
The home place is designed to receive the hydrogenerator.
The home plate is composed of 7 holes for its fixation to the transom and one hole for
the hydrogenerator guard locking pin.
Dimension of the home plate
Recommendations for a good positioning:
1-
Check the robustness and the flatness of the transom as mentioned in the
“Conditions and limits of using” booklet (page 5).
2-
The home plate must be placed as centrally as possible on the transom. This ensures
that the turbine remains submerged when the boat is heeling.
3-
The lower part of the home plate should be placed at the waterline transom while the
boat is loaded under normal conditions of navigation. It should not be placed higher
so that the turbine remains immersed when heeling and limit disruptions related to
algae (which usually float on the surface).
Hole for the
guard locking pin
Fixing holes
X 7
