4
Save Marine, a division of
Save innovations
3 rue des arts et métiers, 38000 Grenoble, France I +33 (0)4 58 00 34 66 I [email protected]
1.2
Operate the automatic clamcleat
This is a security element: the clamcleat is
automatically activated and releases the
rope if the submerged part of the
hydrogenerator strikes a heavy object.
It ensures that the rope maintains the
profil arm and turbine in functioning
position and releases it in case of shock.
This ensures that the transom cannot be
damaged.
The clamcleat is equipped with a two-
position pivoting finger:
- switch the finger on the left to release
the clam
- put back the movable part in its initial
position and rotate the finger on the
right to reset the Clamcleat.
1.3
Hydrogenerator electrical connection
Unscrew the plug of each connector and
connect the hydrogenator cable to the
through-hull (there is an alignment failsafe).
NB: it is not necessary to disconnect the
hydrogenerator when not in use.
OFF
ON
