![SAVE MARINE H240 Installation Manual Download Page 19](http://html.mh-extra.com/html/save-marine/h240/h240_installation-manual_1203763019.webp)
9
Save Marine, a division of
Save innovations
3 rue des arts et métiers, 38000 Grenoble, France I +33 (0)4 58 00 34 66 I [email protected]
3.3
Select the location of the regulator
This device regulates the output signal coming from the generator and optimizes the
recharge of your batteries. It should be located inside the boat.
,
Dimensions of the regulator
Recommendations for a good positioning:
1.
It should be easily accessible.
2.
It must be in a ventilated space in order to minimize its heating and optimize the
functioning of electronic components.
3.
In the upper part of a chest: ensure that it cannot receive direct projection of sea water
and hit by manipulations of stored objects.
4.
In one cabin: ensure that it is not in a place of passage.
5.
In any cases, it is recommended to set the electronic unit:
a.
on a wall that can support its weight (3 kg).
b.
on a vertical surface to improve thermal dissipation, with fins in vertical position
c.
Leaving a distance of at least 40 cm between the top of the electronic box and the
chest or cabin ceiling.