Weekly program PRO 1
Up to 40 switching commands in total can be entered for the
existing time channels with time periods of up to one week.
The program is repeated every week.
Then, another time channel of the weekly program can be se-
lected by using the same procedure
The 40 switching commands of the weekly program can be
distributed among the configured time channels in any arrange-
ment.
For heating circuit 1, factory settings are entered into the weekly
program (
) which can simply be adapted as required
(refer to factory settings).
The switching commands valid for daily actuation (0 hh:mm) are
not taken into account on special days (1...7 hh:mm).
*
)
Dependent on configuration
Key
Function
Display
Set controller to time-program entry status
–
Select weekly program
/ /
/ / *
)
Select the time channel for which the 1st switching command
of the weekly program shall be displayed*
)
e.g.
Heating circuit 1 (see above)
0 06:00
Call the next switching command of the selected time channel
(if required)
0 22:00
Delete the displayed switching command (if required)
– – –:– –
e.g.
Enter the new switching time, e.g. for every day, 9:30 pm and...
0 21:30
e.g.
Enter the operating mode assigned to the switching time...
(see above)
0 21:30
Return to automatic mode
0
=
Daily
1
=
Monday
2
=
Tuesday
3
=
Wednesday
4
=
Thursday
5
=
Friday
6
=
Saturday
7
=
Sunday
1
7
P R O
P R O
1
0
2
1
1
1
1
0
2
1 3
0
1
1
1
R
–
18
–
7 000458 003
