Factory setting
The factory settings (
) refer to an average building and a
common system layout.
You can, of course, adpat all settings quickly and easily to
your specific requirements.
Day of the week and time SET
3
12.03
Wednesday 12:03; after the initial switch-on
a random value is shown here for the day
of the week and for the time.
Year and date
90
01.01
January 1, 1990
Date for switching from wintertime to summertime
03.25
March 25
Date for switching from summertime to wintertime
10.25
October 25
Weekly program PRO 1 for heating circuit 1
No enable/disable commands are programmed for the domestic
hot water supply in the factory settings. This means that do-
mestic hot water is heated at any time if required.
See section PAR... for factory settings of user adjustment values
See section SERV... for factory settings of service adjustment
values.
SET time operations
Setting the day of the week and the time
Example: the current day of the week is Tuesday (2nd day of the week), the time is 09:14 am.
PRO 1
0 06:00
Daily normal operation
0 22:00
from 6:00 am to 22:00 pm
6 07:00
Normal operation on Saturdays
6 23:00
from 7:00 am to 23:00 pm
7 07:00
Normal operation on Sundays
7 22:00
from 7:00 am to 22:00 pm
Key
Display
Explanation
1 23:45
SET mode selected, display shows the current values for day of the week and controller time
– – –:– –
Invalid day of week and time cleared (if required)
2 09:14
Enter valid day of week (2 = Tuesday) and valid time (09:14 = 9:14 am)
1
=
Monday
3 =
Wednesday
5 =
Friday
2
=
Tuesday
4 =
Thursday
6 =
Saturday
7 =
Sunday
S E T
8
2
0
9
1
4
R
–
9
–
7 000458 003
