SATEL INTEGRA
Plus
77
10.1.5 Pager type
For messaging using the PAGER type messages, you must define the parameters of pager
identification. Default parameters of the pager type 1 are adjusted to the SATEL GSM
module requirements for conversion of the PAGER type message into SMS message.
10.2 SMS messaging parameters and options
Name
– individual telephone name (up to 16 characters).
ON
– if this option is enabled, messaging to the given telephone will be possible.
Telephone number
– telephone number which will be notified.
10.2.1 Events assignment
Select the types of events which, if occur in the selected partitions, will result in SMS
messaging.
10.3 Starting the voice messaging
1. Enable the T
ELEPHONE MESSAGING
option.
2. Using the telephone options (see: section T
ELEPHONE OPTION
s p. 56):
– define the mode of dialing the telephone numbers (T
ONE DIALING
option and – in case of
the pulse dialing – P
ULSE
1/1.5
(
OFF
1/2)
option);
– determine whether the control panel, prior to dialing the number, should check the
telephone line for dialing signal (N
O DIAL TONE TEST
option);
– determine whether the control panel is to play back the voice message after going off-
hook, or 15 seconds after the dialing is completed (global option N
O ANSWER TONE TEST
).
– determine whether the voice message is to be played back once or twice (option
D
OUBLE VOICE MESSAGE
).
3. Define the number of attempts to get connected in one round (function M
AX
.
REDIAL
NUMBER FOR ONE ROUND
).
4. Define parameters of the telephones to which messages are to be sent:
– name (up to 16 characters),
– telephone
number,
– type of messaging (select 0 – voice),
– number of attempts made by the control panel to notify the indicated telephone
number about the event, if receipt of the message has not been acknowledged;
– how the receipt of voice message is to be acknowledged (if the messaging is to be
acknowledged, enable the A
NY CODE
option or enter the 4-digit code).
5. Record or synthesize the voice messages which are to be used for messaging (see:
CA-64 SM synthesizer or INT-VG voice module manual).
6. For events about which the control panel is to inform, indicate:
– number of the voice message to be used for messaging;
– telephones to be notified.
7. In order to limit unnecessary messaging, define the cases in which notification can be
cancelled (the parameters C
LEARING IN PARTITIONS
and C
LEARING AFTER ACKNOWLEDGEMENT
and the option C
LEAR MESSAGING ON ALARM CLEARING
).