28 Programming
SATEL
4. The D
LOAD
X program will inform you about establishing connection by means of
a suitable message.
Connection initialized from the
D
LOAD
X
program, but the control panel calls back
and sets up the connection
The telephone number of the alarm control panel must be programmed in the D
LOAD
X
program ("Identifiers and tel. no" window).
1. Click on the
button in the D
LOAD
X program.
2. A drop-down menu will be displayed. Select in it the appropriate control panel modem.
A window will open in which information on the modem initialization will be displayed.
3. Click on the “Connect” button.
4. The control panel will answer, confirm answering the connection, hang up, and then call
back the programmed computer telephone number.
5. The D
LOAD
X program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the "Configuration" window, "Modem" tab). A suitable message will inform about the
connection being established.
Connection initiated by SMS message
1. Click on the
button in the D
LOAD
X program.
2. A drop-down menu will be displayed. Select the "ISDN/GSM modem" in it. A window will
open in which modem initialization information will be displayed.
3. Send to the GSM module connected to the control panel the following SMS message:
xxxxxx.
or
xxxxxx=
("xxxxxx" – the control command programmed in the GSM module,
initializing communication with the D
LOAD
X
program
through
modem) – the control
panel will call, via the GSM module, the programmed computer telephone number;
xxxxxx=yyyy.
or
xxxxxx=yyyy=
("xxxxxx" – the control command programmed in the
GSM module, initializing communication with the D
LOAD
X
program
through
modem;
"yyyy" – computer telephone number to which the control panel is to connect) – the
control panel will call, via the module, the telephone number sent in the SMS message
(the computer telephone number programmed in the control panel will be ignored).
4. The D
LOAD
X program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in
the "Configuration" window, "Modem" tab). A suitable message will inform about the
connection being established.
Connection initiated by the control panel – built-in modem
1. Click on the
button in the D
LOAD
X program.
2. A drop-down menu will be displayed. Select the "Modem 300 bps" in it. A window will
open in which modem initialization information will be displayed.
3. In the LCD keypad connected to the control panel, start the S
TART
DWNL-TEL function
([
code
]
D
OWNLOADING
S
TART
DWNL-TEL). The function is available to the installer,
administrator and user having the D
OWNLOADING STARTING
right.
4. The control panel will call the programmed computer telephone number.
5. The D
LOAD
X program will answer the connection automatically or the program user must
accept establishing the communication (which depends on the settings programmed in