ACCO
SATEL
27
1 - enter the system name in this
field. The configuration file will be
saved under this name on the
computer. The field must be filled.
2 - in this field, you can give
additional information on the
system.
3 - enter the system identifier in this
field. It can include up to 10
characters. You can enter digits
from 0 to 9 and letters from A to F.
The field must be filled.
4 - select the computer port through
which communication with the
module / modules will take place.
5 - click on the button with your
mouse
cursor
to
start
the
procedure
of
searching
for
modules
connected
to
the
indicated port of the computer.
Fig. 20. Window enabling parameters of a new configuration file to be determined.
5. After creating the configuration file (or opening the already existing file) the appearance of
the program menu bar will change (see Fig. 21). The entire menu will be available,
including the other buttons.
Fig. 21. Program menu bar after creating the configuration file.
6. Click your mouse on the button designated M
ODULES
. The M
ODULES LIST
window will
open. If the module search function was not started in the N
EW CONFIGURATION FILE
window before, you can start it now by clicking on the button designated F
IND
. You can
also add modules manually, after clicking on the A
DD
button. The list of all modules (found
System / configuration
file name.
Login / name of
program user.
Port through which
communication is
effected.
Access path to
configuration file on
computer hard disk.
