37
Note: If you’re on a call when you leave the Nationwide PCS Network and enter an area
where roaming is available (whether digital or analog), your call is dropped. If your call is
dropped in an area where you think PCS Service is available, turn your phone off and on
again to reconnect to the Nationwide PCS Network.
Note: When using your phone in analog mode, the handset may feel warm. This behavior is
normal for analog operation.
Setting Your Phone’s Roam Mode
Your PCS Phone allows you to control your ability to roam. By using the Roaming menu option,
you can determine which signals your phone accepts.
Set Mode
Choose from three different settings on your dual band/tri mode phone to control your roaming
experience:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Roaming and press MENU/OK.
4. Select Set Mode and press MENU/OK.
5. To select an option from the following and press MENU/OK.
PCS
Automatic
Analog
Controlling Roaming Charges Using Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming charges apply. This
feature makes it easy to manage your roaming charges by reminding you when you make or
receive roaming calls. It also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or receive calls while on
the Nationwide PCS Network.
To Turn the Call Guard Feature On or Off:
1. Press MENU/OK to access the main menu.
2. Select
Settings and press MENU/OK.
3. Select
Roaming and press MENU/OK.
4. Select
Call Guard and press MENU/OK.
5. Select
On or Off and press MENU/OK.
