8-6
OTF-920 Operation Manual
Supplimentary Status Command
When the OTF-920 is configured with both sliders operating over the same wavelength range the SS
(supplimentary status) command can be used to probe the current operation of each slider. The value
returned by the SS command has the following meaning.
1-st digit 0
– Slider 1 is stationary.
1
– Slider 1 is moving.
2-nd digit 0
– Slider 1 is fixed (see SL command Section 7.5).
1
– Slider 1 is active (see SL command Section 7.5).
3-rd digit 1
– Slider 1 is removed (see SO command Section 7.5).
3
– Slider 1 is moving to removed state (see SO command Section 7.5).
4
– Slider 1 is moving from removed state (see SO command Section 7.5).
4-th digit 0
– Slider 2 is stationary.
1
– Slider 2 is moving.
5-th digit 0
– Slider 2 is fixed (see SL command Section 7.5).
1
– Slider 2 is active (see SL command Section 7.5).
6-th digit 1
– Slider 2 is removed (see SO command Section 7.5).
3
– Slider 2 is moving to removed state (see SO command Section 7.5).
4
– Slider 2 is moving from removed state (see SO command Section 7.5).
7-th digit 0
– Normal operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
