78
Frame Relay for Sangoma Cards (C) Sangoma Technologies Inc. 1999,2000,2001 Page 78 of 78
"
The S508 adapter is configured with the incorrect serial communications chip
" - contact your
Sangoma representative (exit code of 0x08).
"
The S508 adapter has not been located at the defined I/O port address
" - the loader could not
locate the S508 hardware at the specified I/O port address. Check the jumper settings (exit code of
0x09).
FR_TEST.EXE
The error messages and corresponding exit codes for FR_TEST are as follows:
"
A COMMAND LINE ERROR WAS FOUND WHEN LOADING FR_TEST
" - an invalid
command line argument was used (exit code of 0x01).
"
THE FRIP TSR HAS NOT BEEN FOUND AT INTERRUPT VECTOR <VECTOR>
" -
(exit code of 0x02).
"
AN SDLA TIMEOUT OCCURRED (THE FRAME RELAY CODE IS NOT RUNNING)
" -
contact your Sangoma representative (exit code of 0x0A).