57
Frame Relay for Sangoma Cards (C) Sangoma Technologies Inc. 1999,2000,2001 Page 57 of 78
Bit 3
- if set, then the DLCI is new.
0x14
The last Full Status Report received from the Access Node included a DLCI or a number of
DLCIs which were not included in the DLCI list passed when performing the original
SET_DLCI_CONFIGURATION command (DLCI zero).
The user should reconfigure the frame relay code to include these additional DLCIs or contact
the network provider to establish the validity of these DLCIs.
The BUFFER_LENGTH is set to twice the number of unconfigured DLCIs included in this
report. The DATA area consists of a list of these DLCIs, each being represented by a 2-byte,
unsigned, hexadecimal value.
0x1F
The frame relay command used is invalid.
