background image

- 1 -

PZ-829 RC

Fluid level control relay, 

2-position

Fluid level control relays PZ-829 is devised to detect the pre-

sence of conductive liquids reaching the level of the sensor. It al-

low control MAX and MIN statues set by user of controlled fluid.

After the liquid level decreases to MIN (i.e. electrodes MIN and 

COM spaced), the MIN contact is switched to position 11-12, 

whereas the MAX contact remains in position 8-9. On the other 

hand, when the MAX liquid level is reached (MAX and COM elec-

trodes shorted), the relay’s MIN contact will be switched to po-

sition 11-10, whereas the MAX into position 8-7.

Electrode probe connected with a cable with a wire dia-

meter of up to 1 mm² and a maximum length of 100 m.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collection, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for PZ-829 RC








Reviews: