- 1 -
EPP-618
Electronic current
relay
The EPP-618 is a current relay designed to control the values of
the current flowing in the measured circuit with contact swit-
ching feature in the event of exceeding the current value above
and below the set threshold values. The digital display allows
the user to read the current value in the measured circuit on an
ongoing basis and precisely program the values of parameters
according to which it will operate.
The relay is designed to work with a 5 A secondary current trans-
former or without a transformer, in which case its maximum
current is 50 A.
The relay operates according to one of four operating functions:
FI, F2, F3, and F4.
Purpose
Functioning
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: [email protected]
Do not dispose of this device in the trash along with other waste!
According
to the Law on Waste, electro coming from households free of chage and
can give any amount to up to that end point of collec� on, as well as to sto-
re the occasion of the purchase of new equipment (in accordance with the
principle of old-for-new, regardless of brand). Electro thrown in the trash or
abandoned in nature, pose a threat to the environment and human health.
Summary of Contents for EPP-618
Page 8: ... 8 Direct mode Connection diagram ...
Page 9: ... 9 Measurement with a transformer ...
Page 12: ......
