background image

 

2. If the radio is in its menu-browsing state, you can change the volume either pressing the 

Volume up

 and 

Volume down

 buttons on the remote control, or by waiting for the menu display to time-out(nominally 15 

seconds) and then by rotating the

 Select

 control.   

 

         

                                            Audio setting (tone control) 

Your radio has an Audio Settings menu where the bass and treble characteristics of the sound can be adjusted 

to your personal taste.   

1. When the radios is playing, press and hold the 

Select 

control (or press and hold the Select button on the 

remote control). The radio will select the Audio menu which allows bass and treble adjustment as well as 

alternative access to the main Mode Menu.   

 

2. If adjusting selecting bass, rotate the 

Select

 control until 'Bass' is highlighted on the display. Press and 

release the 

Select

 control. The display will show the current Bass level. Rotate the

 Select

 control to set the 

desired level (between -5 and +5) and press and release to confirm selection.   

 

3. If selecting treble rotate the 

Select

 control until 'Treble' is highlighted on the display. Press and release the 

Select

 control. The display will show the current Treble level. Rotate the

 Select 

control to set the desired level 

(between -5 and +5) and press and release to confirm selection.   

 

4. To quickly cancel any bass or treble setting, rotate the

 Select

 control until 'Flat' is highlighted on the display. 

Press and release the

 Select 

control and the equalization levels will be reset.   

 

 

 

 

                       Switching your radio off  

    The Audio settings menu also provides a quick way to switch off your radio. Give a long press to enter the 

menu, and then a short press to select the Off option. Your radio will immediately enter the 

Standby

 mode 

with the clock display. Alternatively you can use the

 Standby

 button on the remote control.   

 

 

 

                            Selecting a radio station 

1. If the radio is in Standby mode press the 

Select

 control to switch it on. If the radio is already playing press 

the

 Select

 control to access the menus. If needed, use the

 Back

 option to access the main Mode menu.   

 

2. Rotate the

 Select

 control until 'Radio Stations' is highlighted on the display.   

 

3. Press the 

Select 

control so that the radio will enter the Radio Stations menu.   

 

4. Rotate the

 Select 

control to choose between 'Location' or 'Genre'.   

Summary of Contents for WFR-20































Reviews: