access the main Mode menu. Rotate the
Select
control until 'Configure' is highlighted on the display.
2. Press the
Select
control to show the Configure menu on the display. Rotate the
Select
control until
'Auxiliary input level' is highlighted.
3. Rotate the
Select
control until either 'Headphone level' or 'Line Input Level' is highlighted on the display,
and then press the
Select
control to activate the desired setting.
4. If needed, select the
Back
option to exit the menu.
Setting the clock
Normally the WFR-20 Internet radio will set its clock automatically to UK time after a connection to the
Internet has been established. Should you need to set the time manually, please follow this procedure.
1. Use the
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu.
2. Rotate the
Select
control until the display says 'Configure'. Press the
Select
control to enter the configure
menu.
3. Rotate the
Select
control until 'Clock Setup' appears on the display. Press the
Select
control to enter the
clock setup menu.
4. Rotate the
Select
control until 'Set Time/Date' is highlighted on the display. Press the
Select
control to
highlight the hour digits on the display.
5. Rotate the
Select
control to select the hour. Press the
Select
control to highlight the minute digits on the
display.
6. Rotate the
Select
control until the correct date is highlighted on the display. Press the
Select
control enter
the date and to highlight the month on the display.
7. Rotate the
Select
control to select the correct month. Press the
Select
control enter the month and to
highlight the year on the display.
8. Rotate the
Select
control to select the year. Press the
Select
control to confirm the clock setting. The display
will show 'Time and Date Set' and will then return to the radio station display.
Setting the clock format