Note: If no buttons are pressed for 10 seconds the radio will exit the alarm setup. If you make a mistake at any
point, use the Back option to go back to the previous screen.
1. Usethe
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu.
2. Rotate the
Select
control until the 'Alarm clock' is highlighted on the display. Press the
Select
control to
enter the alarm settings.
3. Rotate the
Select
control until 'Set Alarms' is highlighted on the display then press the
Select
control. The
display willshow the status of alarms 1-4. It will also offer a 'Disable All' option.
4. Rotate the
Select
control until the desired alarm 1 - 4 is highlighted on the display. Alarms which are not
highlighted show the time of the next alarm (if any) and the day of the week on which they will occur. The
currently highlighted entry will scroll through the full alarm details including whether the alarm is daily,
weekly, etc. and the details of the alarm type (buzzer or radio station name).
5. To change the setting for the highlighted alarm press the
Select
control. The alarm hour will be highlighted.
The 12 hour or 24 hour clock format will be used according to the currently selected clock format option.
6. Rotate the Select control to choose the hour for the alarm. Press the Select control to store this setting and
the minute digits will be highlighted.
7. Rotate the
Select
control to choose the minute for the alarm. Press and
Select
control to store this setting.
The alarm day option will be highlighted on the display:-
Once - will sound at one time only
Everyday - will sound everyday.
Weekly - will sound once every week.
Weekdays - will sound on weekdays only.
Weekends - will sound on weekends only.
8. Rotate the
Select
control to choose one of the above options for the alarm. Press the
Select
control to store
this setting. If setting the alarm to everyday, weekdays or weekends please skip to point 10.
9. Rotate the
Select
control until the required day of the week for the alarm is highlighted on the display. Press
the
Select
control to store this setting. The radio will enter the alarm mode option.
10. The alarm can be set to a radio station or a buzzer alarm. The radio station alarm may be set to any of the
stations which have been stored as presets or to the station currently being listened to. Rotate the
Select
control to select either Buzzer or the required radio station.
11. Press the
Select
control to confirm the alarm settings. Your radio will show 'Alarm Set' and will go back to
the list of alarms with the new alarm setting shown in the display.
