When the alarm sounds
The radio alarm will sound at the selected times for up to 60 minutes unless cancelled. The volume for the
radio alarm will be the same as the volume previously used when listening to the radio or media player. If for
any reason the radio cannot connect to the requested radio station at the time that the alarm is due, the buzzer
alarm will be used instead.
The buzzer alarm sounds for 10 minutes and the volume will gradually increase from a low level. If the radio
is playing at the time that the buzzer sounds, then the buzzer volume is based on the radio volume setting.
1. If the radio alarm sounds when the radio is in standby, the display will show 'Turn on Radio' with a YES /
NO option. If no action is taken the radio will switch off at the end of the alarm period. If you select NO, the
radio will switch off immediately. If you wish to listen to the radio, or to be able to select alternative stations,
then select YES using the
Select
control.
2. If a radio alarm sounds and the radio is already playing, the radio will change to the station specified for the
alarm, and the display will show 'Stop alarm' with a YES / NO option. Selecting YES will revert to the
previous radio station or the media player. Selecting NO will allow the radio station from the alarm to
continue.
3. If the buzzer alarm sounds when the radio is in standby, the display will show 'Turn on Radio' with a YES /
NO option. If no action is taken, the buzzer will stop after 10 minutes. If you select NO, the alarm will switch
off immediately. If you wish to listen to the radio or media player, then select YES using the
Select
control.
4. If the buzzer alarm sounds when the radio is already playing, the display will show 'Alarm'. If no action is
taken, the buzzer will stop after 10 minutes. If you wish to go back to the radio station press the
Select
control.
Disabling alarms
1. To Disable all alarms enter the alarm setup menu and Rotate the
Select
control until 'Disable all' is
highlighted on the display. Press the
Select
control to confirm. The display will show 'All alarms disabled' for
3 seconds then return to the alarms list display.
2. To Disable a single alarm enter the alarm setup menu and rotate the
Select
control until the desired alarm is
highlighted on the display. Press the
Select
control. The display will show 'Enable Alarm YES / NO'.
If NO is selected alarm is cancelled and the display returns to the alarm list.
If YES is selected the alarm details may be changed by modifying any or all of the alarm options.
Sleep timer
Your radio can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted between 15
and 120 minutes in 15 minute increments.
1. When the radio is playing, press the
Select
control to access the menus. If needed, use the
Back
option to
access the main Mode menu.
