enter them exactly.
11. If you make an error use either the
Back
key on the remote control to delete the character entered, or give
a long press on the Select control. Use the left and right arrows to move the block cursor to access incorrectly
entered characters.
12. After the final character of the WEP or WPA key has been entered, locate the 'END' symbol and press the
Select
control. (The 'END' symbol is located between the punctuation symbols and the numbers 0 - 9.) The
radio should now be able to connect to the network.
After you have connected to your network
1. Once connected to your radio to the network (and therefore also to the Internet) it will display the main
Mode menu. This menu provides access to all major functions of the radio. There are also buttons on the
remote control for each of the Mode menu options except for the Configure menu.
2. Rotate the
Select
control until the 'Off' option is highlighted on the display.
Switching your radio on
1. With the radio in Standby mode (displaying the clock), press the
Select
control (or the
On / Standby
button
on the remote control). Rotate the
Select
control forward and backward to highlight different elements in the
menu.
2. When the first item 'Radio Stations' (or 'Stations') is highlighted, press the
Select
control to enter the Radio
menu. Alternatively, you could press the
Radio
button on the remote control.
3. The Radio menu allows selection of radio station by location and genre. It also provides access to the radio
station presets. When the radio first connected to the Internet it automatically stored a radio station in Preset 1.
(If you don't like it, you can easily change it later.) Rotate the
Select
control so that the station name is
highlighted on the display.
4. Press the
Select
control once more and the display will show 'Connecting' while it finds the audio stream
for the station. After a few seconds you should hear the radio station, and then the display will change to show
additional information from the broadcast.
Volume control
1. While the radio station is playing with its name on the radio’s display, you can change the volume by
rotating the
Select
control or by pressing the
Volume up
and
Volume down
buttons on the remote control.
