The clock display can be set to 12 or 24 hour format. The selected format is then also used when setting the
alarms.
1. Usethe
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu.
2. Rotate the
Select
control until the display says 'Configure'. Press and release the
Select
control to enter the
configure menu.
3. Rotate the
Select
control until 'Clock Setup' is highlighted on the display. Press the
Select
control to enter
the clock setup menu.
4. Rotate the
Select
control until 'Clock format' is highlighted on the display. Press the
Select
control to enter
the clock format menu.
5. Rotate the
Select
control to select either 24 hour or 12 hour format. Press the
Select
control to confirm your
choice of clock format.
Setting daylight saving/summer time
These 4 options are available:
European - Sets DST by European rules.
DST On - Sets Daylight Saving Time (1 hour)
DST Off - Cancels Daylight Saving Time.
Local time zone – manually forward or backward by 30 mins/step.
Reset clock – removes any user set time, time-sonze or DST offset and sets them
back to the factory state.
1. Press the
Select
control to switch on your radio and to access the menus.
2. Rotate the
Select
control until the display says 'Configure'. Press the Select control to enter the configure
settings.
3. Rotate the
Select
control until 'Clock Setup' appears on the display. Press the
Select
control to enter the
clock setup menu.
4. Rotate the Select control until 'DST' or ‘Local time zone’ appears on the display. Press the
Select
control to
enter it, then you will be able to set the summer time.
Setting the alarm clock
Your radio has four separate alarms which can be set to wake you to either a radio station or a buzzer alarm.
Each alarm can be set to sound either once, everyday, weekly, weekdays or at weekends. In the event of a
power interruption your radio has built in memory chip that will retain your alarm settings.
