2. Rotate the
Select
control until the 'Alarm clock' is highlighted on the display then press the
Select
control.
3. Rotate the
Selec
t control until 'Sleep timer' is highlighted on the display then press the
Select
control.
4. Rotate the
Select
control until the required sleep time setting is selected between 15 and 120 minutes or to
Off. Press the
Select
control to confirm the setting.
5. The display will show 'Sleep timer' set. Your radio will switch off after the preset time has elapsed.
6. To cancel the sleep time before the preset time has elapsed and to turn off the radio, use the
Select
control
(or the remote control) to turn the radio off manually. To cancel the sleep timer and leave the radio playing, go
back into the sleep timer settings (steps 1 to 4 above) and select the Off option in step 4.
During the last two minutes of the sleep timer period, the radio will gradually reduce the volume before
switching off.
Backlight
This option allows you to alter the radio’s display backlight settings to suit your needs. Separate settings are
available for Active mode (while using the menu system), Inactive mode (when listening), and Standby mode
(when the radio is off with just the clock display showing).
1. Usethe
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu.
2. Rotate the
Select
control until 'Configure' is highlighted on the display. Press the
Select
control to enter the
Configure menu.
3. Rotate the
Select
control until 'Backlight' is highlighted on the display. Press the
Select
control to enter the
Backlight menu.
4. The backlight setting can be adjusted for‘Active’,‘Inactive’and‘Standby’ modes. Rotate the
Select
control
to highlight the desired backlight option then press the
Select
control.
5. The radio will now display the setting for the selected backlight option. You can alter this value by rotating
the
Select
control to increase or decrease it according to your needs.
6. When the desired value is reached, press the
Select
control to store the setting. If the value is not modi.ed or
stored after .ve seconds, the radio exit the Backlight menu and will return to its previous display.
Language selection
