Storing a radio station in a preset
There are 12 memory presets available. All may be accessed using the rotary control. Additionally, presets 1
-6 may be accessed using the remote control.
1. Select the required station as previously described.
2. When the radio is playing use the
Select
control to access the Radio Stations menu. If needed, use the
Back
option.
3. In the Radio Stations menu rotate the
Select
control to display the preset station list.
4. Scroll through the preset list until you reach the next available preset (or a preset that you wish to change).
5. Press and hold the
Select
control until the display shows that the station has been stored - for example,
'Assigned To Preset 1'. The station will be stored under this chosen preset. Repeat this procedure for any other
preset memories that you wish to configure.
6. If using the remote control, presets 1 - 6 can be stored by pressing and holding the required preset button on
the remote control without the need to navigate the radio menus.
Recalling a preset radio station
1. When the radio is playing use the
Selec
t control to access the Radio Stations menu. If needed, use the
Back
option.
2. In the Radio Stations menu rotate the
Select
control to display the preset station list.
3. Rotatethe
Select
control to scroll through the presetstation list (presets 1 - 12).
4. Highlight the required saved radio station and press and release the
Select
control. The radio will connect to
the station stored in preset memory.
5. Alternatively, presets 1 -6 can be recalled by brie.y pressing the required preset button on the remote control
without the need to navigate the radio menus.
Note: If you have not previously stored a radio station in the selected preset, your current radio station will
continue to play.
Listening to previously broadcast material
Some radio stations allow you listen to programmes that have already been broadcast. When you select a radio
station that has this facility, the station does not start playing immediately, but instead the display shows the
options 'Live' and 'On demand'.
1. Rotate the
Select
control to highlight 'Live' or 'On Demand'.
2. Press and release the
Select
control to select:
'Live' - plays the current output from the station as normal.
