Samsung UN75ES9000F, Service Manual, Page: 51 / 114

4-1-4. Using the Smart Touch Control with an IR Blaster
When you connect an IR Blaster with your TV, you can control connected external devices with your TV using the Smart
Touch Control.
Initial Pairing for Smart Touch Control
After you have run the Initial Setup on your TV, you should connect your Smart Touch Control to your TV.
Turn the TV off, and then press the P button on the Smart Touch Control. 1.
The TV will turn on and the connection icon appears on the bottom left of the screen. The TV will connect to your Smart 2.
Touch Control automatically. It can take a minute or two.
NOTE
If you want to perform the pairing process again, press the reset button in the center of the back cover using a pin
or the tip of an unbent paper clip. The Smart Touch Control will be initialized.
Smart Touch Control PAIRING Reset button. •
IR Blaster Pairing
Turn on the IR Blaster.
1.
Move the IR Blaster to the direction of your TV’s IR receiver, and then press the PAIRING button on the bottom of the IR
2.
Blaster.
The TV will connect your IR Blaster and Smart Touch Control automatically.
3.
NOTE
If the connection process failed, try again from Step 2.
IR Blaster PAIRING Reset button. •
IR receiver
30 cm ~ 4 m
I Connecting I I Pairing complete I
Smart Touch Control •
IR Blaster •
4-20
4. Troubleshooting