Using Graffiti 2
77
3. Select
Enabled
or
Auto Enable in Field
from the
Status
pick list.
When you select
Auto Enable in Field
, Graffiti 2 is
enabled only in a text input field.
4. Tap
Done
.
5. Exit the Preferences application.
To write Graffiti 2 characters:
1. Tap the screen where you want your text to appear.
You must see a blinking cursor before you write the text.
2. Use the tables on the following pages to find the strokes
for the letter you want to create. For example, the
stroke shown below creates the letter
n
.
3. Position the stylus on the Graffiti 2 area.
4. Start your stroke at the heavy dot and draw the stroke
shape as it appears in the tables.
5. Lift the stylus from the screen at the end of the stroke
shape.
When you lift the stylus from the screen, your PDA
phone recognises your stroke immediately and prints
the letter at the insertion point on the screen.
Lift stylus here.
Start stroke at
heavy dot.
Summary of Contents for SGH-I530
Page 1: ...Mobile Power Tool and Communicator SGH i530 ...
Page 314: ...315 ...
