Samsung ProXpress C3010 Series Service Manual Download

Page: 111 / 138

4. Alignment and Troubleshooting

► Error Code

M2–1111 / M2–1114 / M2–2210

► Error message

Paper Jam inside machine

Paper Jam inside of duplex

► Symptom

The jammed paper has occurred inside machine.

► Troubleshooting method

1) Open the rear cover. Remove the jammed paper.

2) If the problem persists, check the following.

a) Check if there is any obstacles or paper on the paper path. Remove it.

b) Check if the FRAME-REGI unit and FRAME-SEPARATION unit are assembled properly. If there is any

defective part in these units, replace it or Assy.

c) Check the motor operation, gear in the PH drive unit. If there is any defective parts, replace it or PH drive unit.

d) Check the T1–DRIVE unit. If there is any defective parts, replace it or T1–DRIVE unit.

4-50

Summary of Contents for ProXpress C3010 Series










































































































































Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands

Samsung ProXpress C3010 Series, Service Manual

Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands