Samsung ProXpress C3010 Series Service Manual Download

Page: 99 / 138

4. Alignment and Troubleshooting

► Error Code

C2-4110

► Error message

Prepare Toner

► Symptom

There is not enough toner in the cyan toner cartridge

► Troubleshooting method

1) Print the supply information report. Check the life remaining of the toner cartridge.

2) If its life is at the end, turn the machine off and replace the cyan toner cartridge with new one.

► Error Code

C2–4120 / C2-4150 / C2–4160 / C2–4170

► Error message

Replace Toner

► Symptom

The cyan toner cartridge is at the end of its life.

► Troubleshooting method

1) If its life is at the end, turn the machine off and replace the cyan toner cartridge with new one.

► Error Code

C2-4410

► Error message

Install cyan toner cartridge

► Symptom

The cyan toner cartridge is not installed or the CRUM has some problem.

► Troubleshooting method

1) Check if the cyan toner cartridge is installed properly. Turn the machine off then on.

2) If the error message is not disappear, remove the cyan toner cartridge. Thoroughly roll the cartridge five or six times

to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.

3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.

4) If the problem persists, replace the cyan toner cartridge with new one.

4-38

Summary of Contents for ProXpress C3010 Series










































































































































Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands

Samsung ProXpress C3010 Series, Service Manual

Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands