4. Alignment and Troubleshooting
•
Service Func. > Capture Log
This function copies all the saved log in the system to a UBS memory as a zip file. Note that the size of system
log could reach up to 1GB. If the system log size become considerably huge, it will take longer time to copy to the
plugged memory.
•
Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians
or dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
SFE
Code
Description
001
In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output
direction regardless of simplex or duplex.
002
The device always prints output as mono about PC printing.
007
The device prints as original 1 dot line without 2 dot line compensation.
008
The device ignores paper size command in PRN and prints as paper size in tray.
009
PJL readback response is changed with HPOS.
1) Add <CR><LF> to EOJ response.
2) No EOJ job but EOJ response occurs.
3) Device uses Job name instead of EOJ name.
010
Maximum value of 'Power save time' is increased as 240 min.
012
If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.
032
If this SFE option is enabled, the image processor shall not omit line that is less than 1 dot. By PCL 6 command
rule, the device shall not print less than 1 dot line. But this SFE is enabled, the device shall print it.
033
If this SFE option is enabled, the image processor shall draw Letter Gothic font as previous thickness(Bitstream)
thicker than URW++.
035
The device shall provide auto scale for A3/Leger to A4/Letter in case of A4 Models that doesn't support
A3/Ledger size.
•
Service Functions > Chk ID Sensing
This menu sets up operation for CTD calibraiton according to engine status.
-
On : executes CTD calibration accroding to engine status. This may skip the CTD calibraiton while machine
comes to determined condition.
-
Off : executes CTD calibration according to determined condition.
4-23
Copyright© 1995-2017 SAMSUNG. All rights reserved.
