Samsung ProXpress C3010 Series Service Manual Download

Page: 116 / 138

4. Alignment and Troubleshooting

► Error Code

S6–3113

► Error message

Error: #S6-3113 Call for service

► Symptom

Network PHY chip is defective.

► Troubleshooting method

1) Turn the machine off then on.

2) If the problem persists, replace the main board.

► Error Code

S6–3123

► Error message

Network Problem: IP Conflict

► Symptom

IP address conflicts with that of other system. / There is no response when checking the ping test.

► Troubleshooting method

Change the machine’s IP address.

•

Set-up the IP address in this order, Network -> TCP/IP (IPv4) -> STATIC.

•

In case of DHCP or Bootp, reboot the machine to receive a new IP address.

► Error Code

S6–3128

► Error message

802.1x Network Error

► Symptom

The confirmation was requested for wired port, the server has rejected. / The confirmation protocol is not the same or
user information (ID/Password) is wrong.

► Troubleshooting method

Check the setting-up for 802.1x confirmation server.

•

Re-enter the server information and confirmation protocol.

•

Re-enter the user information.

4-55

Summary of Contents for ProXpress C3010 Series










































































































































Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands

Samsung ProXpress C3010 Series, Service Manual

Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands