Samsung ProXpress C3010 Series Service Manual Download

Page: 102 / 138

4. Alignment and Troubleshooting

► Error Code

C2-5512 / C2-5515 / C2-5517 / C2-5518 / C2-5526

► Error message

Not Compatible C toner cart.

► Symptom

The black toner cartridge is not compatible.

► Troubleshooting method

1) If the toner cartridge is not a Samsung genuine toner cartridge, replace with new one.

► Error Code

C2–5711 / C2–5712 / C2–5713 / C2–5714

► Error message

Error: #C2-571x Call for Service

► Symptom

The black toner cartridge is not installed or the CRUM has some problem.

► Troubleshooting method

1) Check if the black toner cartridge is installed properly. Turn the machine off then on.

2) If the error message is not disappear, remove the black toner cartridge. Thoroughly roll the cartridge five or six

times to distribute the toner evenly inside the cartridge. And reinstall the toner cartridge.

3) If the problem persists, check that the CRUM contact area is contaminated. Clean it.

4) If the problem persists, replace the black toner cartridge with new one.

4-41

Summary of Contents for ProXpress C3010 Series










































































































































Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands

Samsung ProXpress C3010 Series, Service Manual

Search results

Summary of Contents for ProXpress C3010 Series

Reviews:

Related manuals for ProXpress C3010 Series

Brands by name

Popular brands