Samsung OfficeServ 7000's Manual Download Page 12

Page: 12 / 125

Version 1.1

November 2014

Page | 10

Connect the LAN cable connected to the network to the

LAN connection

port

of the phone.

- When power is supplied from the LAN port (PoE), the phone is booted up upon LAN

connection.

If PoE is not supported, connect the power adapter to the power
connection port. When the plug of the power adapter is connected to the
outlet, the phone is booted up. (The power adapter must be purchased
separately.)

- When using the power cable, pass it through the center hole of phone cradle.

To make a video call, connect a camera to the camera connection port.

To use a USB, connect a USB to the USB connection port.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands

Samsung OfficeServ 7000's, Manual

Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands