Samsung OfficeServ 7000's Manual Download Page 5

Page: 5 / 125

Version 1.1

November 2014

Page | 3

Caution

CAUTION

Power

Do not power off the product while upgrading a program.

Installation/Maintenance

The LAN cable to the network
should be connected to the LAN
port of the product, NOT to the PC
connection port.

Safety is not guaranteed if
expendable items or additional
goods unauthorized by Samsung
are used.

Do not place heavy objects on top
of the product.

Do not attempt to disassemble,
repair, or rebuild the product
yourself.

Do not drop the product or apply
impact on the product. This may
damage the screen or exterior and
the internal parts.

Use a soft and dry cloth when
cleaning the product.

Do not spray water directly onto the
product; and do not use chemicals
such as wax, benzene, alcohol,
thinner, mosquito killer, perfume
spray, lubricant, detergent, etc.
near the product.

Do not place the product in direct
sunlight.

Listening with a headset or
earphones at high volume may
damage your hearing.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Samsung OfficeServ 7000's, Manual, Page: 5 / 125

Search results

Summary of Contents for OfficeServ 7000's

Reviews: