Samsung OfficeServ 7000's Manual Download Page 89

Page: 89 / 125

Version 1.1

November 2014

Page | 87

INTEROPERATION
SERVICE

Smartphone Interoperation (SDM)

The Samsung Deskphone Manager (SDM) is a smartphone application that allows a
user to use the contacts, call log, or program keys and also configure various settings
by interoperating with SMT-i5343.

Supported Smart Phones and Tablets



Samsung Galaxy S3, S4, S5



Samsung Note 2 and 3



Galaxy Note 10.1 Tablet



Other Android devices may work, but have not been tested by
Samsung.

System Configuration Diagram

The SDM supports only the program keys when it is installed on a pad.

The authentication procedure is the same both for smartphones and the pad.

The only difference is the layout.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands

Samsung OfficeServ 7000's, Manual

Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands