Samsung OfficeServ 7000's Manual Download Page 80

Page: 80 / 125

Version 1.1

November 2014

Page | 78

Password and Lock

You can set up a password which is required when changing various settings of the
phone and lock the phone so that it cannot be used by others.

- The default password is

[1234]

- The call lock function may not be supported by some systems.

If you have forgotten the default password, consult your system administrator.

The call lock function may not be supported by some systems.

Menu Lock

Change

[Menu]



[Settings]



[Password and Lock]



[Menu Lock]

Call Lock

Select

[Menu]



[Settings]



[Password and Lock]



[Call Lock]

Select a call lock option.

[Unlock]

: Unlock the calling function.

[Trunk]

: Restrict outgoing trunk calls.

[Lock All]

: Restrict all outgoing calls.

Changing Password

Select

[Menu]



[Settings]



[Password and Lock]



[Change

Password]

Change the password as instructed on the screen.

- You can enter up to 4 characters for the password.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands

Samsung OfficeServ 7000's, Manual

Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands