Samsung OfficeServ 7000's Manual Download Page 32

Page: 32 / 125

Version 1.1

November 2014

Page | 30

List of Missed Calls

You can easily check the missed calls, messages, or voice messages on the main
screen.

Items shown may vary depending on the features supported by the system.

Missed calls, SMS, and voice messages
are shown with numbers indicating their
respective counts.

Press the button on the left of a phone
number to view the numbers of missed
calls, messages, and voice messages.

Use the right button to check the details
of each type.

Press the button on the left of a phone
number to view the numbers of missed
calls, messages, and voice messages.

Use the arrow keys to select an item and
press the OK key or use the right button
to check the details of each type.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands

Samsung OfficeServ 7000's, Manual

Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands