Samsung OfficeServ 7000's Manual Download Page 87

Page: 87 / 125

Version 1.1

November 2014

Page | 85

uReady Settings

Select

[Menu]



[Settings]



[uReady Settings]

Enable/disable the feature and enter detailed information.

This feature is available only in an environment where uReady connections are
supported.

Wi-Fi 5G Only Setting

If the Wi-Fi 5G only mode is selected, only the Wi-Fi APs in the 5GHz frequency band
are searched.

Enable

[Menu]



[Settings]



[Wi-Fi 5G Only]

Wi-Fi Hotspot

You can use your IP phone as a Wi-Fi hotspot. This is useful if there is no wireless AP
in your environment.

- This feature may not be supported in some systems or countries.

- Up to 3 devices can be connected over Wi-Fi.

- The hotspot feature is supported in wired mode only.

- The use of VoIP over hotspot connection is not guaranteed.

- Abnormal behaviors may occur due to Bluetooth or radio interferences.

- Abnormal behaviors may occur depending on the position of the user due to

radio obstacles, e.g. walls and partitions.

- Access of wireless devices connected to the Wi-Fi hotspot is limited within the

network of the IP phone. The Internet and other external networks may not be
accessible in certain environments.

- Using multiple SMT-i5343 phones in close proximity as Wi-Fi hotspots may

result in interference between Wi-Fi channels.

Summary of Contents for OfficeServ 7000's






























































































































Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands

Samsung OfficeServ 7000's, Manual

Search results

Summary of Contents for OfficeServ 7000's

Reviews:

Related manuals for OfficeServ 7000's

Brands by name

Popular brands